Operation; Packaging, Transport And Storage - Vega VEGATRENN 141 Operating Instructions Manual

Packaging
Transport
Transport inspection
Storage
Storage and transport
temperature
VEGATRENN 141 • 4 ... 20 mA/HART
Detailed information about the power supply can be found in chapter
"Technical data".
3.3

Operation

No adjustment or configuration of VEGATRENN 141 is necessary. A
parameter adjustment of the connected sensors can be carried out
via the HART communication sockets behind the hinged front cover.
Adjustment of the connected sensors is carried out preferably via a
Windows PC with a parameter adjustment software such as PACT-
ware and corresponding DTM. A VEGACONNECT interface converter
or a HART modem is necessary for connecting the PC.
3.4

Packaging, transport and storage

Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
based on ISO 4180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE
foil is also used. Dispose of the packaging material via specialised
recycling companies.
Transport must be carried out in due consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
•
Storage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions"
•
Relative humidity 20 ... 85 %
3 Product description
7