Related Manuals for Vega B63-48
Summary of Contents for Vega B63-48
- Page 1 Operating Instructions Overvoltage protection in two-wire technology B63-48, B63-32 For 4 … 20 mA/HART, Profibus PA and Foundation Fieldbus circuits Document ID: 33012...
-
Page 2: Table Of Contents
Take note of the Ex specific safety instructions for Ex applications. These instructions are attached as documents to each instrument with Ex approval and are part of the operating instructions. Editing status: 2019-09-04 B63-48, B63-32 • For 4 … 20 mA/HART, Profibus PA and Foundation Fieldbus circuits... -
Page 3: About This Document
Sequence of actions Numbers set in front indicate successive steps in a procedure. Battery disposal This symbol indicates special information about the disposal of bat- teries and accumulators. B63-48, B63-32 • For 4 … 20 mA/HART, Profibus PA and Foundation Fieldbus circuits... -
Page 4: For Your Safety
To avoid any danger, the safety approval markings and safety tips on the device must also be observed and their meaning read in this oper- ating instructions manual. B63-48, B63-32 • For 4 … 20 mA/HART, Profibus PA and Foundation Fieldbus circuits... -
Page 5: Safety Label On The Instrument
DIN EN ISO 14001. Please help us fulfil this obligation by observing the environmental instructions in this manual: • Chapter "Packaging, transport and storage" • Chapter "Disposal" B63-48, B63-32 • For 4 … 20 mA/HART, Profibus PA and Foundation Fieldbus circuits... -
Page 6: Product Description
10 kA to ground. Is only used with version thread M20 x 1.5 B63-48, B63-32 • For 4 … 20 mA/HART, Profibus PA and Foundation Fieldbus circuits... -
Page 7: Packaging, Transport And Storage
Relative humidity 20 … 85 % Lifting and carrying With instrument weights of more than 18 kg (39.68 lbs) suitable and approved equipment must be used for lifting and carrying. B63-48, B63-32 • For 4 … 20 mA/HART, Profibus PA and Foundation Fieldbus circuits... -
Page 8: Mounting Instructions
½ turn with a SW 27 wrench. Do not use any grease for sensors with plastic housing B63-48, B63-32 • For 4 … 20 mA/HART, Profibus PA and Foundation Fieldbus circuits... -
Page 9: Connecting To Power Supply
9. Pull out terminal block inside B63-48, B63-32 with pliers 10. Push signal cables and screen through the cable gland and con- nect according to chapter "Wiring plan" to the terminals B63-48, B63-32 • For 4 … 20 mA/HART, Profibus PA and Foundation Fieldbus circuits... - Page 10 5 6 7 8 Fig. 2: Overvoltage protection B63-48, B63-32 after installation and connection 14. Screw the housing lid back on The electrical connection is finished. B63-48, B63-32 • For 4 … 20 mA/HART, Profibus PA and Foundation Fieldbus circuits...
-
Page 11: Wiring Plan
Wiring plan 4...20mA Fig. 3: Wiring schematic B63-32, B63-48 Sensor Overvoltage protection Controller/PLC Potential equalisation Terminals sensor Wire colour/Polarity Red (+) Black (-) Ground terminal Green/Yellow B63-48, B63-32 • For 4 … 20 mA/HART, Profibus PA and Foundation Fieldbus circuits... -
Page 12: Maintenance And Fault Rectification
• Please contact the agency serving you to get the address for the return shipment. You can find the agency on our home page www.vega.com. B63-48, B63-32 • For 4 … 20 mA/HART, Profibus PA and Foundation Fieldbus circuits... -
Page 13: Dismount
If you have no way to dispose of the old instrument properly, please contact us concerning return and disposal. B63-48, B63-32 • For 4 … 20 mA/HART, Profibus PA and Foundation Fieldbus circuits... -
Page 14: Supplement
Protection in assembled and connected IP 66/67 state Approvals Instruments with approvals can have different technical specifications depending on the version. Reference temperature 25 °C (77 °F). B63-48, B63-32 • For 4 … 20 mA/HART, Profibus PA and Foundation Fieldbus circuits... -
Page 15: Dimensions
12 mm (0.47") 56 mm (2.21") 76 mm 300 mm (2.99") (11.81") 56 mm (2.21") Fig. 4: Dimensions B63-48, B63-32 Thread M20 x 1.5 Thread ½ NPT B63-48, B63-32 • For 4 … 20 mA/HART, Profibus PA and Foundation Fieldbus circuits... - Page 16 Subject to change without prior notice © VEGA Grieshaber KG, Schiltach/Germany 2019 VEGA Grieshaber KG Phone +49 7836 50-0 Am Hohenstein 113...