Glossary And Pictograms; Identification Of Operating Personnel - Wasp DELTA 2040 CLAY Manual Of Use And Maintenance

Hot surfaces, pay attention not to touch when heated

1.7. Glossary and pictograms

1.7.1. Identification of operating personnel

The operator responsible for the operation or maintenance of the printer must possess the specific professional
requirements for each intended operation.
The operator must be instructed and therefore be aware of the tasks entrusted to him who has responsibility for
the job.
Below is a description of the professional profiles for the operators involved in the printer.
User
Qualified personnel, able to perform simple tasks, trained on using the printer.
It supervises the proper functioning of the same and the eventual first intervention in case an alarm condition
occurs.
Mechanical maintenance technician
Qualified technician able to conduct the printer under normal conditions, to intervene on the mechanical parts to
carry out all the necessary adjustments, maintenance interventions and repairs.
It is not enabled to work on electrical systems in the presence of voltage.
Electrical maintenance engineer
Qualified technician able to conduct the printer in normal conditions; it is in charge of all the electrical interventions
of regulation, maintenance and repair. It is able to operate in the presence of voltage inside enclosures and
© CSP S.r.l.
12