Connection Buttons - DekoLight Quasar HVM Product Notes Manual

Product-Notes Manual

7. Connection buttons

In order to be able to use the functions already preprogrammed in the delivery state, you only need to mount
one or up to 4 buttons as listed below. This enables you to operate the controller without the APP if you wish.
The pre-programmed assignment of the individual buttons can be found on the following page.
Deko-Light Elektronik-Vertriebs GmbH
www.deko-light.com / deko@deko-light.com
Technical Data can be changed without advance notice. Errors excepted.
Article No.: 843007
All kinds of Buttons
(normally open, potential-free)
of all manufacturers of switch ranges can
be used.
02.09.2020
12 / 24