DekoLight Quasar HVM Product Notes Manual page 45

Product-Notes Manual
Deko-Light Elektronik-Vertriebs GmbH
www.deko-light.com / deko@deko-light.com
Technical Data can be changed without advance notice. Errors excepted.
Profile: 230V Dim / Dim 0-10V/1-10V
1 light can be controlled in the app. The light is switched on /
off by pressing the round button.
The light can be dimmed by moving the „Brightness" slider.
Additional settings (minimum / maximum brightness etc.).
Profile: Sensor -Mode
Analog sensors usually deliver when they do
activated, a 230V control signal at the switching output. The
desired action of the sensor can be set via the APP menu item
„Settings". A saved scene can be best. from one or more lights,
possibly a fixed color / gradient, and much more. started start.
Article No.: 843007
02.09.2020
21 / 24