Product-Notes
Manual
Article No.: 843062 / 843063 / 843068 / 930657
843063 / RF-Wall switch
Power supply:
IP safety class:
Frequency:
Channel:
Zones:
8. Basics
To dissipate heat from the controller, we recommend leaving enough space during installation so that the air can
circulate and the controller does not overheat.
Make sure that all screw connections are firmly tightened. Avoid multiple pinched wires on the screw terminals.
Stranded wires must always be provided with wire end sleeves. Pay close attention to suitable cable cross-
sections and avoid cable lengths of more than 10m in the low-voltage range.
9. Connection / operation of the components
Controller
Supply voltage
DC 12/24V
Terminals Output
1 Channel / Single
2 Channel Mode / CCT
3 Channel / RGB
4 Channel / RGBW
5 Channel / RGB+CCT
Deko-Light Elektronik-Vertriebs GmbH
www.deko-light.com / deko@deko-light.com
Technical Data can be changed without advance notice. Errors excepted.
3V (2x AAA)
IP20
2,4 GHz
1-5 Channel (S, CCT, RGB, RGBW, RGB-CCT)
1
Channel mode indicator LED:
White = 1 Kanal Modus / Single
Yellow = 2 Kanal Modus / CCT
Red = 3 Kanal Modus / RGB
Green = 4 Kanal Modus / RGBW
Blue = 5 Kanal Modus / RGB+CCT
W
W
W
WW WW
W
WW
CW
Switch to select
the required channel mode
W
W
V+
CW
CW
V+
B
G
R
V+
B
G
R
V+
B
G
R
V+
Terminals
LED-Stripe (s.u.)
26.11.2021
1 / 16