App - Switch / Dim / Sensor Mode - DekoLight Quasar HVM Product Notes Manual

Product-Notes Manual

6. APP - Switch / Dim / Sensor mode

Once you have configured and activated the controller, you can control it as listed below.
Under the menu item
„Home" everyone active
controller and its current
switching states listed.
Depending on the profile for which you have configured the controller (1 channel / single, 2 channel / HCL,
3 channel / RGB, 4 channel / RGBW etc.) you are offered different options for controlling the luminaire.
Deko-Light Elektronik-Vertriebs GmbH
www.deko-light.com / deko@deko-light.com
Technical Data can be changed without advance notice. Errors excepted.
Profile: 230V switching
1 light can be controlled in the app.
The light is switched on / off by pressing the round button.
Additional settings (minimum / maximum brightness etc.)
can be made in the submenu.
To access the controller settings of the respective
controller, tap the desired controller.
Article No.: 843007
02.09.2020
20 / 24