Features Overview - Viking PA-IP Product Manual

Green Unit Status LED
Red Page / Status LED
Reset Button
PoE LAN Port 10/100, PoE Class 3 (<13 Watts):
Connect to your LAN via RJ45 plug and CAT5
or greater twisted pair wire.
Yellow Network Status LED: Lights steady
to indicate power and data link. Blinks to
indicate network activity.
Relay Output Contact
(2A@30VDC / 250VAC maximum):
Connect to trigger input of amplifier, etc.
Switch or Contact Input: To enable night ring feature.
30AE 40AE
25AE
35AE 300AE
40AE
Up tp (6) Optional Viking Analog
Speakers, see DOD 497 and 498
(not included)
See MANAGING POWER
LOSS section on page 2.
MAC Address Label:
The MAC address is a unique
12 digit number used by network
equipment to send data packets
to the correct IP address.

Features Overview

Line Out
600 Ohm
Paging
NO
Audio
COM
NC
_
Speaker Out
+
Bottom View
Model:
S/N: XXXXXXXX
P/N:
Viking Electronics, Inc. (715) 386-8861
1531 Industrial St., Hudson, WI 54016
www.vikingelectronics.com DOD#
MAC: 18E80FXXXXXX
4
Line in
Background Music
Line Level Audio
Source (Mono),
not included
Up to (15)
8 Ohm Speakers
(25AE shown,
not included)
Up to (15)
8 Ohm Speakers
(30AE shown,
not included)
xxxxxx
xxxxxxxx DEV:
Optional Paging Amplifier
Viking model PA-60 shown,
not included (DOD 493)
VIKING
MODEL PA-60
©
VIKING
ELECTRONICS
HUDSON, WI 54016
60 WATT 2 ZONE
POWER AMPLIFIER
CHANNEL 1 CHANNEL 2
70V OUT 70V OUT
GAIN GAIN
PWR
LED 1 2 3 4 5 6 7 8 9 10 11 12
Up to (15)
8 Ohm Speakers
(35AE shown,
not included)
Up to (15)
8 Ohm
Speakers
(40AE shown,
not included)