Advertisement
Quick Links
SOFTWARE DOWNLOAD AND QUICK START GUIDE
FOR MULTI-USE LOGTAG RECORDERS
(TRIX-8/16, TREX-8, TRIL- 8 AND HAXO-8)
LogTag recorders are received in a "hibernation" state to conserve battery
life.
Prior to use they must be configured to suit your requirements.
Step 1:
Download LogTag Analyser as follows:
Click on link:
http://logtagrecorders.net/download/software/analyzer/release/ltanalyzer_28r2.exe
Click on the software download. Save / Run
Download – LogTag Analyser 2.8 r 2
LogTag Analyser will automatically download and create a desktop
shortcut.
YOU ARE NOW ENABLED TO CONFIGURE AND READ LOGTAGS
Step 2:
Plug in your USB cradle (will self-install) and open the LogTag
Analyser programme.
Tel: 021 852 7686
Fax: 086 664 7173
Email: info@logtagdata.com
43 Bright street, Somerset West, 7129
Advertisement
Related Manuals for LogTag Recorders TRIX-8
Summary of Contents for LogTag Recorders TRIX-8
- Page 1 SOFTWARE DOWNLOAD AND QUICK START GUIDE FOR MULTI-USE LOGTAG RECORDERS (TRIX-8/16, TREX-8, TRIL- 8 AND HAXO-8) LogTag recorders are received in a “hibernation” state to conserve battery life. Prior to use they must be configured to suit your requirements. Step 1:...
- Page 2 Step 3: (Configure) Insert the desired LogTag into the USB cradle. A blank screen will appear with a menu bar along the top. Click on LogTag on the top menu and select „Configure‟ in the drop down menu. The program will automatically complete step one „Locate LogTag‟ ( left screen) Step 4: You will now be on Step 2 of the programme >...
- Page 3 Example: Configuration Screen. To continue, click _next >. Configuration options will be loaded onto the Logtag device for use. Tel: 021 852 7686 Fax: 086 664 7173 Email: info@logtagdata.com 43 Bright street, Somerset West, 7129...
-
Page 4: Configuration Notes
Step 5: Your LogTag is NOW ready. TO START – Push and hold down the „start/mark‟ until the red and green/ starting display indicators flash and then release when they stop flashing. Your recorder is now ACTIVE and will begin recording. RE-CONFIGURE YOUR LOGTAGS Repeat steps 2 to 6 each time you want to re-configure your LogTags for use,... - Page 5 LogTag Analyser – edit suggestions: 1. Naming convention _ the user ID on the logtag can appear FIRST in the header of the saved data file in My Logtag Data folder. OPEN Logtag analyser. Go to EDIT (Top Left) > go to OPTIONS >...
- Page 6 Tel: 021 852 7686 Fax: 086 664 7173 Email: info@logtagdata.com 43 Bright street, Somerset West, 7129...