Configure The Wireless Pci Adapter - Airlink101 AWLH3026T Quick Installation Manual

Section 3 Section 2

Configure the Wireless PCI Adapter

Note to Windows XP Users:
You must disable the Wireless Zero Configuration Utility in order to use the WLAN
Monitor. Please refer to the following steps to disable the Wireless Zero
Configuration Utility.
Step 1 Double-click on the Wireless Network Connection Icon in the system
tray and then click on Change advanced settings under Related Tasks.
Step 2 Go to the Wireless Networks tab, verify the "Use Windows to configure
my wireless network settings" box is unchecked and click OK.
To open the Wireless PCI Adapter's utility go to Start > (All) Programs >
Airlink101 > WLAN Monitor.
Note: The utility automatically adds an available wireless network to the
Preferred WLANs box. If no SSID is added, or if the SSID is wrong,
please refer to the following steps to join the appropriate wireless network.
Be sure to remove the wrong SSID from the Preferred WLANs box before
adding any new SSID. You can remove the wrong SSID by selecting it and
clicking on Remove.
Step 1 Select the SSID of the wireless network you wish to connect to from the
Available WLANs box and click Connect.