Advertisement
Section 3
Section 3
Configure the PCI Adapter
Note to Windows XP Users:
You must disable the Wireless Zero Configuration Utility in order to use the WLAN
Monitor. Please refer to the following steps to disable the Wireless Zero
Configuration Utility.
Step 1
Double-click on the Wireless Network Connection Icon in the system
tray, then click on Properties or Advanced.
Step 2
Go to the Wireless Networks tab, uncheck the "Use Windows to
configure my wireless network settings" check box and click OK. If the
Wireless Networks tab does not appear, skip this step.
Step 3
To open the PCI Adapter's utility, double-click on the WLAN Monitor Icon
in the system tray.
The utility automatically adds an available wireless network to the Preferred
WLANs box. If no SSID is added, or if the SSID is wrong, please refer to the
following steps to join the appropriate wireless network. Otherwise, skip to step 8.
Note: Be sure to remove the wrong SSID from the Preferred WLANs box before
adding any new SSID. You can remove the wrong SSID by selecting it and
clicking on Remove.
Step 4
Select the SSID of the wireless network you wish to connect to from the
Available WLANs box and click Add.
Advertisement
