Advertisement
Quick Links
Download this manual
See also:
User Manual
Quick Installation Guide
802.11g Wireless PCI Adapter
Model # AWLH3026T
Section 1
Install Driver & Utility
This Quick Installation Guide only provides the basic instructions. For more
advanced features such as configuring encryption settings, please refer to the
User's Manual in the provided CD.
Note: Be sure to power off your computer before inserting the PCI
adapter. For Windows 98SE and ME users, you may be prompted
to insert the Windows 98SE or ME CD during the driver installation.
Be sure to have your Windows 98SE or ME CD ready.
Step 1
Insert the PCI adapter into an available PCI slot and turn on your
computer.
Ver. 1A
Package Content:
•
Wireless PCI Adapter
•
Driver & Utility CD
•
Quick Installation Guide
Step 2
Windows will launch the Found New Hardware Wizard. The wizard
appears differently depending on your operating system. Click Cancel to quit the
wizard and insert the Driver & Utility CD into your CD drive.
Step 3
The Autorun screen will appear. Select Install Utility and Driver from the
menu.
Note: If the Autorun screen doesn't appear automatically go to Start, Run,
and type D:\utility\setup.exe (where D is the letter of your CD drive) and
click OK.
Advertisement
Related Manuals for Airlink101 AWLH3026T
Summary of Contents for Airlink101 AWLH3026T
-
Page 1: Quick Installation Guide
Quick Installation Guide 802.11g Wireless PCI Adapter Model # AWLH3026T Section 1 Install Driver & Utility This Quick Installation Guide only provides the basic instructions. For more advanced features such as configuring encryption settings, please refer to the User’s Manual in the provided CD. - Page 2 Step 4 Click Next at the welcome screen. Step 5 Click Next to accept the default destination folder. Step 6 Click Next to accept the default program folder. Step 7 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signature Not Found prompt). Step 8 Verify Yes, I want to restart my computer now is selected and click Finish to restart your computer.
-
Page 3: Configure The Wireless Pci Adapter
Section 3 Section 2 Configure the Wireless PCI Adapter Note to Windows XP Users: You must disable the Wireless Zero Configuration Utility in order to use the WLAN Monitor. Please refer to the following steps to disable the Wireless Zero Configuration Utility. -
Page 4: Technical Support
Step 2 If you are connecting to an unsecured wireless network, a caution message will appear. Click OK to exit the message. Step 3 Verify the SSID you have selected is in the Preferred WLANs box and click Apply. Section 4 Step 4 A blue circle appears indicating a connection is established.