Bluetooth ® Operations - Panasonic RF-D30BT Operating Instructions Manual

Bluetooth operations
®
You can listen to the sound from the Bluetooth
device from this unit wirelessly.
≥ Refer to the operating instructions of the
Bluetooth device for details.
®
Connecting via Bluetooth
Preparation
≥ Turn on the Bluetooth
®
place the device near this unit.
∫ Pairing with Bluetooth
1
Press [ ].
≥ If "Pairing" is indicated on the display, go to step 3.
2
Press and hold [j PAIRING] until "Pairing"
appears.
≥ This unit enters pairing mode.
Alternatively, you can set this unit to pairing mode via
this unit's menu.
§1
3
Select "RF-D30BT" from the Bluetooth
Bluetooth menu.
®
≥ The MAC address (alpha-numerical string that is
unique to each unit) may be displayed before
"RF-D30BT" is displayed.
≥ "Connected" is indicated on the display.
4
Start playback on the Bluetooth
§1 To enter pairing mode via this unit's menu
1 Press and hold [j MENU] for at least
2 seconds.
2 Press [4/:]
§2
"Pairing" and then press [ENTER].
3 Press [4/:]
§2
"Yes" and then press [ENTER].
≥ To cancel, select "No".
§2 Alternatively, you can turn [TUNE/SELECT] to select
menu item/setting.
audio
®
menu
®
feature of the device and
devices
®
device's
®
device.
®
or [3/9] to select
§2
or [3/9] to select
§2
∫ Connecting a paired Bluetooth
device
1
Press [ ].
≥ "Ready" is indicated on the display.
2
Select "RF-D30BT" from the Bluetooth
Bluetooth menu.
®
≥ "Connected" is indicated on the display.
3
Start playback on the Bluetooth
≥ Press [1/;] to pause or resume the playback.
≥ Press [4/:] or [3/9] to skip track.
≥ If prompted for the passkey, input "0000" or "1234".
≥ You can register up to 8 devices with this unit. If a 9th
device is paired, the device that has not been used the
longest will be replaced.
≥ This unit can only be connected to one device at a time.
≥ When "Bluetooth" is selected as the source, this unit will
automatically try and connect to the last connected
Bluetooth device. ("Linking" is indicated on the display
®
during this process.) If the connection attempt fails, try to
establish a connection again.
Disconnecting a Bluetooth
While a Bluetooth device is connected
®
Press and hold [j PAIRING] until "Pairing" appears.
≥ Alternatively, you can disconnect a Bluetooth
this unit's menu as follows.
1 While a Bluetooth
®
Press and hold [j MENU] for at least
2 seconds.
2 Press [4/:] or [3/9]
§3
"Disconnect" and then press [ENTER].
3 Press [4/:] or [3/9]
§3
and then press [ENTER].
("Ready" is indicated on the display.)
≥ To cancel, select "No".
§3 Alternatively, you can turn [TUNE/SELECT] to select
menu item/setting.
≥ The Bluetooth device will be disconnected if a different
®
audio source (e.g., "DAB") is selected.
Viewing available information
Press [DISPLAY] to show the date.
®
device's
®
device.
®
device
®
® device via
device is connected:
to select
§3
to select "Yes"
§3
9
TQBJ2225