Maintenance - Panasonic RF-D30BT Operating Instructions Manual

Radio
DAB/DAB+ reception is poor.
≥ Keep the antenna away from computers, televisions, other
cables and cords.
≥ Move the unit to another location and do a full scan again.
Static or noisy reception is heard while listening
to a radio broadcast.
≥ Check and adjust the antenna.
≥ Try to keep a certain amount of distance between the
antenna and AC adaptor.
≥ Turn the TV or other audio players off or separate it from
this unit.
≥ Keep this unit away from mobile phones if there is
interference.
≥ Noise would be heard when batteries are low. Connect the
AC adaptor or replace batteries.
Bluetooth
Pairing cannot be done.
≥ Check the Bluetooth
≥ The device is out of the 10 m communication range. Move
the device nearer to the system.
The device cannot be connected.
≥ The pairing of the device was unsuccessful. Do pairing
again.
≥ The pairing of the device has been replaced. Do pairing
again.
≥ This unit might be connected to a different device.
Disconnect the other device and try connecting the device
again.
≥ Turn the unit off and on and then reconnect.
The device is connected but audio cannot be
heard through the system.
≥ For some built-in Bluetooth
audio output to "RF-D30BT" manually. Read the operating
instructions of the device for details.
Sound from the device is interrupted.
≥ The device is out of the 10 m communication range. Move
the device nearer to the system.
≥ Remove any obstacle between the system and the device.
≥ Other devices that use the 2.4 GHz frequency band
(wireless router, microwaves, cordless phones, etc.) are
interfering. Move the device nearer to the system and
distance it from the other devices.
12
TQBJ2225
®
device condition.
®
devices, you have to set the
®
Messages
The following messages may appear on the unit's
display.
"Alarm Not saved"
≥ The changes made to the alarm settings are incomplete.
The changes will be lost.
"Linking"
≥ This system is trying to connect to the last connected
Bluetooth device when "Bluetooth" is selected.
®
"No DAB Station"
≥ No DAB/DAB+ station available.
≥ Check the antenna.
≥ Move the unit to another location and do a full scan again.
"Preset Empty"
≥ There are no preset DAB/DAB+ stations to select. Preset
some channels. (l 7)
"Service not available"
≥ No DAB/DAB+ reception.
"Time Not saved"
≥ The changes made to the time settings are incomplete.
The changes will be lost.
"USB Overcurrent Remove Device"
≥ The USB device is using too much power. Disconnect the
USB device. Then, disconnect the AC adaptor from the AC
mains socket, and then reconnect the AC adaptor to the
AC mains socket.
≥ Check the connection, it may be caused by a faulty cable.

Maintenance

Disconnect the AC adaptor from the outlet before
maintenance.
∫ Clean this unit with a soft, dry cloth
≥ When dirt is heavy, wring a wet cloth tightly to wipe the dirt,
and then wipe it with a dry cloth.
≥ Never use alcohol, paint thinner or benzine to clean this
unit.
≥ Before using chemically treated cloth, carefully read the
cloth's instructions.
∫ To dispose or transfer this unit
The unit may keep the user settings information in
the unit. If you discard this unit either by disposal or
transfer, then follow the procedure to return all the
settings to the factory defaults to delete the user
settings.
(l 11, "To return all settings to the factory defaults")