Timer Settings - Panasonic RF-D30BT Operating Instructions Manual

Timer settings

1
Press [TIMER] to enter Timer menu.
2
Press [4/:]
item or setting and then press [ENTER].
≥ To cancel the setting in the middle, press [TIMER].
§ Alternatively, you can turn [TUNE/SELECT] to select
menu item/setting.
Kitchen timer
The kitchen timer is a convenient countdown timer.
Set the desired duration. You can set up to
120 minutes.
– Off, 1:00 to 120:00
≥ Set the volume (12 (minimum) to 30 (maximum)).
The kitchen timer starts at a low volume and
increases gradually to the preset level.
(Volume adjustment made using [VOLUME j, i]
will not affect the kitchen timer volume.)
≥ " " is displayed after you set the timer.
≥ To cancel, select "Off".
∫ To stop the sounding kitchen timer
Press any button or turn any knob.
(If you have not stopped it, it will sound for
59 minutes.)
≥ The countdown is indicated on the display for 10 seconds.
≥ The kitchen timer works in both unit on and standby
modes, regardless the unit is powered via the AC adaptor
or by batteries.
≥ To view the remaining time while the unit is on, select
"Kitchen timer" and then press [ENTER].
To view the remaining time in standby mode:
– Press [DISPLAY] twice (if an alarm is not turned on).
– If you have turned on the alarm, press [DISPLAY]
3 times to view the remaining time of the kitchen timer.
Sleep
The sleep timer turns off the unit after the set time (in
minutes).
– Sleep off, 30 minutes, 60 minutes, 90 minutes,
120 minutes
≥ "SLEEP" is displayed when the sleep timer is set.
≥ To cancel, select "Sleep off".
≥ To view the remaining time, select "Sleep" and then
press [ENTER].
Alarm
The Alarm Wizard is shown.
is displayed after you set the alarm.
" "
Alarm
Select "On" to turn on the alarm.
– Off, On
On time
Set the hours and minutes of start time.
10
TQBJ2225
or [3/9] to select desired
§ §
Snooze
Select "On" to turn on the snooze function. Snooze
interval is 5 minutes.
– On, Off
Source
≥ Set the audio source.
If FM or DAB is set, select the last station you
tuned in to ("Last listened") or a preset station as
the audio source.
– Buzzer, DAB, FM
≥ Set the volume (12 (minimum) to 30 (maximum))
The alarm starts at a low volume and increases
gradually to the preset level.
(Volume adjustment made using [VOLUME j, i]
will not affect the alarm volume.)
∫ To stop the sounding alarm
Press [Í/I] or press and hold [TIMER] for at least
2 seconds.
"Alarm Off" is displayed.
∫ To snooze the sounding alarm
Press any button (except [Í/I]) or turn any knob to
put the alarm into snooze mode.
≥ The unit will switch into standby mode and the
indicator blinks slowly.
≥ Press [Í/I] to turn on the unit will also stop the
snooze mode.
≥ The alarm does not work when the unit is powered by
batteries.
≥ The alarm works in both unit on and standby modes.
≥ When you enter the alarm's "On time" setting, the current
alarm time will be displayed.
To view the alarm time in standby mode, press [DISPLAY]
twice.
≥ Check that the date and time are set correctly, or else the
alarm may not work as desired.
≥ The alarm will sound at the set time every day for a
duration of 59 minutes.
≥ You need to set the alarm again every time you disconnect
and connect the AC power or after you replace the
batteries.
Time
The time and date are updated automatically with the
DAB/DAB+ broadcast (if available). You can also set
the time and date manually with the Time menu.
This is a 24-hour clock.
– Set date: Set the day, month and year.
– Set time: Set the hours and minutes.
≥ In standby mode:
The time and date are displayed when the unit is
powered via the AC adaptor. To view this
information when the unit is powered by batteries,
press [DISPLAY].
" "