Bluetooth - Panasonic RF-D20BT Operating Instructions Manual

Bluetooth

You can connect and play an audio
device wirelessly through Bluetooth
Preparation
• Switch on the Bluetooth
the device and put the device near
the system.
• Read the operating instructions of
the device for details.
Pairing a device
Preparation
If this system is connected to a
Bluetooth ® device, disconnect it
(Z"Disconnecting a device").
1
Press and hold [
If "Pairing" is shown, continue with
step 5.
2
Press [MENU].
3
Press [
select "Pairing" and then press
[ENTER].
4
Press [
select "Yes" and then press
[ENTER].
"Pairing" is shown.
To cancel, select "No".
5
Select "RF-D20BT" from the
Bluetooth
If prompted for a passkey, input
"0000" or "1234".
The device connects with this
system automatically after pairing is
complete.
Note:
You can pair up to 8 devices with this
system. If a 9th device is paired, the
device that has not been used for the
12
longest time will be replaced.
®
feature of
®
].
TUNE/SELECT
TUNE/SELECT
® menu of the device.
Connecting a device
Preparation
® .
If this system is connected to a
Bluetooth
(Z"Disconnecting a device").
1
Press [
"Bluetooth Ready" is shown.
2
Select "RF-D20BT" from the
Bluetooth
3
Start playback on the device.
Press [4/9] to pause or resume the
playback.
Note:
• A device must be paired to connect.
• This system can only connect to one
device at a time.
• When "Bluetooth" is selected as the
source, this system will automatically try
to connect to the last connected device.
Disconnecting a device
] to
While a Bluetooth
connected
] to
1
Press [MENU].
2
Press [
select "Disconnect" and then
press [ENTER].
3
Press [
select "Yes" and then press
[ENTER].
"Bluetooth Ready" is shown.
To cancel, select "No".
Alternatively, press and hold [
"Pairing" is shown to disconnect the
device.
device, disconnect it
®
].
menu of the device.
®
device is
®
TUNE/SELECT
TUNE/SELECT
] to
] to
] until