Communication Protocols Towards Home Automation Systems - Siemens TUTORbit POL687 Instructions For Installation, Use And Maintenance Manual

4 - INSTALLATION
4.23 - Communication protocols
towards home automation systems
TutorBit can be connected to a supervisor via the protocols:
- MODBUS TCP / IP
- MODBUS RTU
- KNX
- BACNET
The MODBUS TCP / IP connection is made through the same
Ethernet port.
The MODBUS RTU connection must be made on the "RS485"
terminals by interposing a POL902.00 / STD module (code
63501075).
The KNX connection must be made directly on the "CE"
terminals.
The BACNET connection must be carried out by adding to
the system a POL908.00 / STD module (code 63501076) that
connects to the slide on the right of TutorBit.
COSMOGAS
TUTORBIT 62