Climate Controller KST-20 Vento | KST-20 Vento/CO2 | KST-20 Vento/RN 2.1. installation personnel Operation is only permitted when: Installation only by qualified persons. • Fixed installation within buildings. • Installation on a suitable wall. The electrical connection should only be done by qualified electricians.
Climate Controller KST-20 Vento | KST-20 Vento/CO2 | KST-20 Vento/RN 3. product description 3.3. aH-Controlled Technology The KST-20 Vento is a climate control with "aH- Controlled" technology demand-oriented ventilation of private, commercial and industrial rooms of all kinds. The basic principle of ZILA climate control systems...
Page 6
Climate Controller KST-20 Vento | KST-20 Vento/CO2 | KST-20 Vento/RN building protection as well as for maintaining a comfortable climate. Controlled dehumidification is based on the comparison of absolute humidity. In this process, moist room air is exchanged with drier outside air.
Climate Controller KST-20 Vento | KST-20 Vento/CO2 | KST-20 Vento/RN Definition of the speed: Restricted use in case of defects in The speed is defined at the building physics. beginning of an active phase and is In the case of defects in building...
Climate Controller KST-20 Vento | KST-20 Vento/CO2 | KST-20 Vento/RN Basic ventilation only continues with DZMIN until the desired humidity is reached or the absolute humidity inside is lower than the absolute humidity outside. 3.4.3. Cooling (K) By simply adjusting the configuration parameters,...
Climate Controller KST-20 Vento | KST-20 Vento/CO2 | KST-20 Vento/RN 3.5. Comfort functions Integrated time switch With the integrated timer, active times for the ventilation units can be set. In this way, the ventilation remains switched on in the specified time window regardless of the climatic conditions.
Page 10
Climate Controller KST-20 Vento | KST-20 Vento/CO2 | KST-20 Vento/RN 5: Connect the power cable as well as the actuators by passing the cables through the gland and connecting them to the appropriate terminals. The terminal blocks can be removed for this purpose.
Climate Controller KST-20 Vento | KST-20 Vento/CO2 | KST-20 Vento/RN 5. connection of the actuators The KST-20 Vento climate control system serves as an intelligent mains switch and can also control speed-controlled devices. Various connections are available on the climate control system for this purpose.
Climate Controller KST-20 Vento | KST-20 Vento/CO2 | KST-20 Vento/RN 1-stage fan for supply air and exhaust air 1-stage fan and window opener Key to abbreviations: 1-stage fan and KL 1: Power supply 230V AC condensation dryer or KL 2 and KL 3:...
Climate Controller KST-20 Vento | KST-20 Vento/CO2 | KST-20 Vento/RN 6.2. Display illumination Key „Mode “ In normal operation, a manual ventilation process If no key is pressed on the control unit for longer can be started by pressing the MODE button.
Climate Controller KST-20 Vento | KST-20 Vento/CO2 | KST-20 Vento/RN The dry protection function ensures that the relative humidity in the corresponding room is not too low. The input range is between 30% and 40% of relative humidity. 6.4.6. Time This option is available in all operating modes.
Climate Controller KST-20 Vento | KST-20 Vento/CO2 | KST-20 Vento/RN 7. circuit diagrams 6.4.10. Cool -TSP This option is only available in cooling mode. Two 1-stage fans The device parameter Temperature switching threshold for cooling defines the switching threshold for the cooling operating mode.
Page 17
Climate Controller KST-20 Vento | KST-20 Vento/CO2 | KST-20 Vento/RN 1-stage fan and Condensation dryer two 2-stage fans 1 speed-controlled fan and 1 Condensation dryer two speed-controlled fans Handbook Version: ENG_05052020_ANHU_KST20VENTO|...
Climate Controller KST-20 Vento | KST-20 Vento/CO2 | KST-20 Vento/RN 1 speed-controlled fan und 1 window opener speed also changes climate-controlled, whereby CO2 has priority. 8.2. CO2- Measurement The device also has a CO2 sensor for monitoring the air quality.
Climate Controller KST-20 Vento | KST-20 Vento/CO2 | KST-20 Vento/RN 9. additions to the KST-20 of the climate values. The current Radon value is shown on the display. Vento /RN 9.3. Connection of the sensors The KST-20 Vento/RN is equipped with three connection sockets for the sensors.