Installation Personnel; Used Pictograms; Intended Use; Foreseeable Misuse - ZILA KST-20 Vento Mounting And Operating Instructions

Climate controller
Table of Contents

Advertisement

Climate Controller KST-20 Vento | KST-20 Vento/CO2 | KST-20 Vento/RN

2.1. installation personnel

Installation only by qualified persons.
The electrical connection should only be done by
qualified electricians. They have an electrotechnical
training and the knowledge of the dangers and
effects that can be caused by an electric shock.

2.2. Used Pictograms

Imminent danger, which leads to
serious injury or death if not
observed.
DANGER
Potentially dangerous situation
that could lead to minor to
moderate physical injury.
CAUTION
Possible situation that could lead
to material damage to the product
or its surroundings.
ATTENTION
INFO symbol for important
information and tips.
Enumeration symbol for
information on the respective
topic.
1.
Instructions. Carry out the
specified instructions in sequence.

2.3. Intended use

The unit is used for the automatic and controlled
activation of supply air and exhaust air elements for
dehumidification, ventilation or cooling of cellars,
storage and supply rooms, showrooms, offices,
changing rooms and similar rooms.
Typical applications
Dehumidification of rooms and buildings,
such as cellars, archives, museums, churches
Cooling of production halls and server rooms
Ventilation of living spaces according to DIN
1946-6
Ventilation of meeting and classrooms,
sports halls and fitness studios
Operation is only permitted when:
Fixed installation within buildings.
Installation on a suitable wall.

2.4. Foreseeable misuse

ZILA is not liable for damages caused by improper
use. Do not use the device under the following
circumstances:
in the vicinity of flammable materials, liquids
or gases
in potentially explosive atmospheres
in outdoor areas without further protection

2.5. Safety Instructions

Installation and electrical connection only by
qualified persons.
Read these operating instructions carefully
before commissioning.
Only operate the device with the voltage and
frequency specified on the type plate.
Do not make any changes to the device.
Never operate the device without the
electronics cover.
Handbook Version: ENG_05052020_ANHU_KST20VENTO|
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kst-20 vento/co2Kst-20 vento/rn

Table of Contents