Airlink101 AR695W User Manual page 45

Wireless Mode
SSID Broadcast
Channel
WDS
WPS
Security
Wireless Client List
11b/g/n mixed
Enable
11
routers in the same area. It's recommended to change
default SSID value to the one which is meaningful to you,
like myhome, office_room1, etc.
Please select the wireless mode from one of the
following options:
11b/g/n mixed: 2.4GHz band, allows 802.11b, 802.11g,
and 802.11n wireless network clients to connect to this
router (maximum transfer rate 11Mbps for 802.11b clients,
maximum 54Mbps for 802.11g clients, and maximum
300Mbps for 802.11n clients*).
11g Only: 2.4GHz band, only allows 802.11g wireless
network clients to connect to this router (maximum
transfer rate 54Mbps*).
11b Only: 2.4GHz band, only allows 802.11b wireless
network clients to connect to this router (maximum
transfer rate 11Mbps*).
11n Only: 2.4GHz band, only allows 802.11n wireless
network clients to connect to this router (maximum
transfer rate 300Mbps*).
Select Enable to broadcast the SSID so that your
wireless client can detect it on the available wireless
network list.
Please select a channel from the drop-down list of
'Channel Number' for broadcasting. You can choose any
channel number you want to use.
Please see 3.1.3.1 for WDS settings.
Please see 3.1.3.2 for WPS settings.
You can choose None, WEP, 802.1x and RADIUS,
WPA-PSK, WPA2-PSK, WPA, WPA2 for encryption
mode. The detailed settings will appear after you choose
an encryption. Please see below instructions for each
Security type for more details.
Please see 3.1.3.3 for Wireless Client List information.
41