Table of Contents
Advertisement
IOT ePort E20
4
Software configuration
Configuration is carried out using the IOT Service Tool. Supplier:
www.hi-flying.com/download-center-1/applications-1/download-item-iotservice
After installing and starting the IOT Service Tool, the connected network is scanned and
the e-ports found are displayed, and can be further processed.
After selecting the e-port, click on „Config" to access the configuration settings.
NOTE
The default settings are configured on the eBus. If Modbus is used, proceed as de-
scribed in Section 4.4.
12
V4.00
Advertisement
Table of Contents
