About The Smart Vacprep Software; Add Or Remove A Smart Vacprep - Micromeritics Smart VacPrep Operator's Manual

2 A
BOUT THE
If a software update is required for the analyzer to support the Smart VacPrep, the software can be
downloaded from the internet at this location:
http://www.micromeritics.com/Smart-VacPrep-Software.aspx
The degasser software is installed as a part of the analyzer installation. During installation, an
IP address will be assigned to the unit allowing the unit to connect automatically during startup. Up to
three additional degasser units can be installed.
Menu options for the Smart VacPrep are provided on the Smart VacPrep menu.
A R
DD OR EMOVE A
A Smart VacPrep unit must be removed from one application before it can be added to another
application if they are running on the same subnet.
Smart VacPrep Operator Manual — 067-42800-01
Dec 2013
S V P
MART AC
S V P
MART AC

2 About the Smart VacPrep Software

S
REP OFTWARE
REP
2 - 1