Placing Wave Control Units In The Cabinet - GE WAVE Cabinet 20 User Manual

4.2 Placing WAVE control units in the cabinet

Introduction
This section describes how to install WAVEPOD™ control units in the WAVE Cabinet.
Other small WAVE control units, for example CO2MIX20, can be installed in a similar way.
Instruction
Follow this sequence to place WAVE control units on the top shelf.
Step
1
2
WAVE Cabinet 20/50 User Manual 28-9651-86 AA
WARNING
Disconnect power. Always disconnect power from the instrument
before performing any installation or maintenance task.
Action
Lift the first WAVE control unit onto the top shelf.
Orient the unit so that the attachment points on the side are easily accessed.
4.2 Placing WAVE control units in the cabinet
4 Installation
17