To Power The Unit; Use Of The Convenient 4-Way Outlets - Bosch GPB18V-5C Operating/Safety Instructions Manual

To power the unit

To Connect AC Power Plug
Plug the AC power cord of the unit into a standard AC
power outlet/socket with AC 120V/60Hz, it will switch
to AC once it is plugged in if it was running from a
battery.
To Operate by the Battery
Bosch battery pack supplies DC power to the unit in all
modes when the unit is disconnected from AC power.
The 4 power outlets are not available until AC cord is
plugged into AC.
To reduce risk of electric shock,
only plug the unit into a Ground
fault circuit interrupter (GFCI) protected outlet when
used in damp locations. if a GFCI protected outlet is
not available, use a portable receptacle with built-in
GFCI protection. Test GFCI protected outlet according
to instruction provided by GFCI manufacturer. If the
GFCI protected outlet does not pass the GFCI testing,
do not use that outlet. Only plug radio into a functional
GFCI protected outlet.
Use of the Convenient
4-way Outlets
The combined output rating of the
four AC outlets is 10A Max. To
reduce the risk of electric shock or fire hazard, do not
overload the AC outlets.
INDICATOR
LIGHT
With the Unit plugged into AC power, perform the
following steps to use the convenient power outlets:
1. Lift up the protective cover to expose the AC power
outlets.
2. Plug into the outlet the desired AC appliance or
power tool.
3. Once you are done using the AC outlets on the unit,
insure that the protective covers properly close.
Do not use where water is likely to
enter unit. This device will not
guard against shock hazard from: 1. Defects or faults in
the electrical supply to the interrupter. 2. Personal
contact with both circuit conductors from the
interrupter.
13
PROTECTIVE
COVER
A