Install The Microwave Oven; Secure The Trim Kit Frame - Whirlpool WMT55511K Installation Instructions Manual

Install the Microwave Oven

1. Position microwave oven near cutout opening.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2. Plug in microwave oven.
3. Slide the microwave oven back and into place.
4. Adjust the microwave oven gently to the cutout/cabinet
center.

Secure the Trim Kit Frame

1. Holding the trim kit frame in place, use 7/64" drill to drill four
pilot holes into the front face of the cutout/cabinet through
the mounting hole guides in the upper and lower corners of
the trim kit frame.
NOTE: The holes will be drilled downward from the top, and
upward from the bottom at an angle of about 45°.
A. Trim kit frame
B. Mounting hole guide
C. 7-16x15/16" flat head wood screw (4)
D. Cutout ceiling
2. Secure trim kit frame to cutout/cabinet by installing four
#7-16x15/16" flat head wood screws into the pilot holes
drilled.
NOTE: To avoid damage to the trim kit frame, do not overtighten
screws.
Installation is now complete. Replace any loose items that have
been removed from microwave oven cavity.
Save these Installation Instructions for future reference.
9