Install The Microwave Oven (24" [61.0 Cm] Installation Only) - Whirlpool BUILT-IN MICROWAVE OVEN Installation Instructions Manual

For 24" (61.0 cm) installation, the mounting brackets must be
attached to the 2 side edges of the cutout opening.
To Attach Mounting Brackets:
1. Hold the bracket firmly against the side rim of the opening, as
shown.
The tiered edge of the bracket should be flat against the inside
wall of the opening. The small tier should rest against the floor
of the cutout opening.
A
B
C
D
A. Mounting bracket
B. Tiered edge (shaded)
2. Using a drill with 5/64" (2 mm) bit, drill pilot holes through the
2 holes in the tiered edge.
3. Secure the bracket to the opening side rim with two 1/2" T-10
screws.
A
A. Tiered edge
B. T-10 screws
4. Repeat on other side.
6
Install the Microwave Oven
(24" [61.0 cm] Installation Only)
C. Small tier
D. Cutout floor
B
To Install Microwave Oven:
WARNING
Excessive Weight Hazard
Use two or more people to move and install
microwave oven.
Failure to do so can result in back or other injury.
NOTE: For this microwave oven, the door handle may be used for
lifting. Do not use any other portion of the control panel, side
brackets, front frame or trim for lifting.
1. Empty microwave oven of any loose items.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2. With the microwave oven near the opening, plug the
microwave oven into the grounded 3-prong outlet.
3. Using 2 or more people, slide the microwave oven all the way
into the opening.
4. Open the microwave oven door. The holes in the door facing
frame should align with the holes in the mounting brackets.
Secure the microwave oven door facing to the mounting
brackets using four 1" T-10 screws.
A
B
C
A. Microwave oven door facing frame
B. Cabinet
C. 1" T-10 screws (4)
5. Proceed to "Complete Installation" section.