Replacement Service Parts Identification - Idex BAND-IT S75099 Owner Manual And Tool Operating Instructions

Replacement
Service Parts
Identification
Production tools will experience wear of specific parts. Preventative Maintenance, including
regular cleaning, lubrication and checking all fasteners for tension will reduce the replacement
frequency of these parts.
1) S45799 Gripper kit – Always replace all components as a kit including the spring.
2) J93099 Cutter Blade, Backing Plate Kit – Always replace all components as a kit
including new bolts.
3) J00587 Shear Hook
4) S45087 Clamp Tail Tripper Plate
Holding Air
Pressure
Gage
Holding
Pressure
Regulator
Shear Hook
Cutter Blade,
Backing Plate, and
Gripper Assembly
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street Denver,
CO 80216-3070 USA
P: 1-800-525-0758 F: 1-800-624-3925
www.BAND-IT-IDEX.com
Cut-off
Handle
11
S75099 Pneumatic
Junior Clamp
Application Tool
Tension Air
Pressure
Gage
Tension
Pressure
Regulator
Clamp
Tension
Speed
Control
Tension Cylinder
Document# P36687 Rev. J
© Copyright
BAND-IT-IDEX, Inc. 2021
All rights reserved