Page 4
¼” to ¾” wide and available diameter clamps range from 13/16” to as large as 8”. All clamps can be easily installed on hose assemblies or objects chosen by the operator using the BAND-IT S75099 air tool. • During the operator controlled cycle, the S75099 Air Tool will tension the clamp around the object by pulling the band through the buckle until the desired tension is achieved.
Page 21
Application Tool Additional Factory Support and Tool Service: The BAND-IT S75099 Air Tool requires periodic maintenance. The frequency of significant repairs can be greatly reduced by following a simple, regular, preventative maintenance such as maintaining tension on fasteners and proper lubrication as outlined in this manual. If this tool needs repair or complete overhaul, it should be returned to BAND-IT in Denver.
Need help?
Do you have a question about the BAND-IT S75099 and is the answer not in the manual?
Questions and answers