Customer Service - Idex Liquid Controls A8180 Series Installation-Parts

Customer Service

Contacting the Factory
Before you contact the factory, note the model number and serial number of the component.
The serial number directs Liquid Controls staff to a file containing all information on material
specifications and test data applying to your specific component. When ordering parts, the
Liquid Controls Group technical manual should be consulted for the proper part numbers.
Always include the model number and serial number when ordering parts.
The model and serial numbers are shown on the nameplate of the unit. Record this
information for future reference.
Liquid Controls Return Material Authorization Requests
When returning Liquid Controls products for repair, warranty evaluation or calibration, follow
these directions:
1. Remove all residue from the Liquid Controls component(s) to be returned. Ensure that
the grooves and corners around or inside seals and crevices are cleaned. This is
especially important if the component was in contact with hazardous materials. See the
Remove Hazardous Material Warning below.
2. Complete the Return Material Authorization request form.
Get the latest PDF manual:
Mobile/online version of this manual:
https://www.lcmeter.com/resources/technical/manuals
https://www.lcmeter.com/manuals
Mechanical Air & Vapor Eliminators
35