Montage Der Integralrutsche - Quadro Starter Manual

Hide thumbs Also See for Starter:
Table of Contents

Advertisement

1.22 Montage der Integralrutsche

Montage der Integralrutsche
Schritt 1 (Abb. 1):
Verschrauben Sie, gemäß der Abbildung, eine QUADRO
Platte mit den QUADRO Plattenschrauben. Schieben Sie dann die QUADRO
Integralrutsche über die beiden offenen 35cm Rohre.
Schritt 2 (Abb. 2):
Beenden Sie nun den Bau Ihres QUADRO Modells, durch
das Schließen der offenen Rohrenden.
Schritt 3 (Abb. 3):
Möchten Sie die QUADRO Integralrutsche im Bereich des
Auslaufs mit einem QUADRO Rohr verbinden (bspw. notwendig bei Kombi-
nation mit Pool XXL, Art. 11680), lassen Sie die Rutsche entsprechend der
Abbildung am unteren Ende durch Drücken in das Rohr einrasten.
Hinweis (Abb. 4):
Die QUADRO Rutschen bieten Ihnen die Möglichkeit einen
Gartenschlauch (ohne Adapter) anzuschließen. Stülpen Sie hierzu einen Gar-
tenschlauch über den Zapfen auf der Rückseite der Rutsche.
Tipp (Abb. 5):
Es kann vorkommen, dass der Schlauch nicht fest genug
auf dem Zapfen sitzt. In diesem Fall fixieren Sie ihn zusätzlich mit einer
Schlauchschelle (erhältlich im Baumarkt).
Assembling of the Integrated Slide
Assembling of the Integrated Slide
Step 1 (Illustration 1):
As shown in the illustration, attach the QUADRO panel
with the matching screws for panels. Then slide the QUADRO slide over the
two open 35 cm tubes.
Step 2 (Illustration 2):
Finalize the construction of the QUADRO model by
closing the open ends of the tubes.
Step 3 (Illustration 3):
In case you wish to connect the end of the QUADRO
slide with another QUADRO tube (for example, required in combination with
pool XXL, Art 11680) push the lower end of the slide and make sure it latches
into the tube.
Advice (Illustration 4):
The QUADRO slides give you the opportunity to con-
nect a hose pipe (without adapter). Pull the hose pipe over the connector on
the backside of the slide.
Tip (Illustration 5):
It can happen that the hose cannot be attached tight en-
ough to the connector. In this case, use a hose clamp to additionally tighten
it (supplied in do-it-yourself stores).
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents