© 2018
Order #XXXXX
1
Expand the two aluminum
frames & place side by side.
Qty. 2
4
Attach rubber rings to graphics, as shown. Hook rings around metal pins.
7
Attach left & right Fabric Backers to Velcro tabs on back of frames.
Then affix middle Backer to Velcro on left & right backers.
Velcro tabs
on back hubs
Quadro FG-205 10'x20' Pop-up Display
2
Lower & secure the Locking Bars.
B a c k e r
B a c k e r
B a c k e r
BACK VIEW
3
Extend Spacer Bars & connect the two frames using screws & hex nuts.
5
Attach lights by sliding the sections together.
8
Attach Case-to-Counter
graphics to cases.
Example of
Assembly
SETUP INSTRUCTIONS
If you would like to tell us about your experience with your setup instructions please email us at info@classicexhibits.com
Spacer
Bar
hex
Spacer
Bar
screw
Spacer
Bar
Qty. 5 Lights
Finished
nut
When installed
6
Attach Shelves
(see opposite page)