Table of Contents
Advertisement
Available languages
Available languages
Handling the Wattsun Dock and Pack
1.
Do not disassemble or make any changes to the product. Danger of
causing short circuit or electric shock.
2.
Carry the product with both hands at all times.
3.
The operator or user is responsible for accidents, personal injury or damage to the
property of others.
4.
Protect the product against heat, continuous sunlight and fire. In connection with the
risk of explosion
5.
Never allow anyone who hasn't read these instructions use this product.
6.
Keep the product out of rech of children
7.
The product is suitable for all weather conditions, it is recommended however, to keep
the product away from water and moisture. Long-term contact with water or moistu-
re can cause corrosion on the contacts. This could cause power loss and a shorter
lifespan.
8.
Avoid shocks and hits to the product. Do not drive over the power cable, do not squeez
it or pull it.
9.
In case of damage and improper use of the product, vapors may be released. Provi-
de fresh air and consult a doctor in case of complaints. The fumes may irritate the
respiratory system.
10.
Keep the product clean. Pollution can lead to an electric shock.
11.
Only connect the power cable from the power supply to a power outlet with a
circuit breaker of 30 mA or less to reduce the risk of electric shock.
12.
Don't use the product in bad weather conditions, especially in case of severe weather
conditions.
13.
Only use the product in daylight or adequate artificial light.
14.
Check the product before use and after an incident for any damage and have it
repaired if necessary. For service and repairs contact us via hello@wattsun.net
15.
Do not use the product while being in a state of overall poor judgement, when you
are tired, ill or under the influence of alcohol, drugs or medication.
16.
Do not cover the product when it's in use or while charging. The product could
overheat and may stop function optimally.
32 - English
17.
Prevent any contact with body parts, paper clips, coins, keys, nails, screws and
other small metal objects that can cause the contacts to bridge. A short circuit
between the contacts may result in electrical shocks, burns or even fire.
18.
Use the product on a dry and flat surface and always place it on the four feet.
19.
Turn off the product, unplug the power cable the socket before moving the
product. Turn off the product when the power cord is tangled or when the product is
left unattended, even if just for a brief moment. Keep the power cord away from heat,
oil, sharp objects and edges.
Check before use
Description
1.
Before use, check the casing, the contacts, the OLED
display and the power button.
2. Clean the product with a soft brush.
3. Check the (Wattsun Charger 360) charger before use.
4. Charge the product. Including before long-term storage.
5. Check the power cord of the electrical device you want to
connect to the Wattsun Dock before each use. Do not use
the product if there's a potential defect.
6. Before use, make sure the ventilation system is free of
blockage.
7.
Clean dust filters. (See maintenance)
33 - English
X
X
X
X
X
X
X
Advertisement
Chapters
Table of Contents
