Appendix:a; Troubleshooting - AIPTEK MPVR User Manual

Troubleshooting

When using the camera:
Problem
The camera can
not be powered on
normally.
The camera is still
powered on, but the
LCD monitor does
not display.
Can not take
pictures or video
clips when pressing
the Shutter or
Record button.
The LCD monitor
displays "MEMORY
ERROR" or "CARD
ERROR" message.
Or the camera
cannot read the
memory card.

Appendix:A

Cause
The battery is out of
power.
The battery is incorrectly
installed.
If the camera stays
idle over one minute,
the LCD monitor will
automatically shut down
to save power.
Out of memory.
The camera is
recharging the flash
strobe.
Using a "protected" SD
card.
The format of the
memory card is not
compatible with the
camera.
The memory card is
corrupted.
39
Solution
Replace the battery.
Re-install the battery.
Press any button except the
power button to reactivate
the display.
Free some space from the
SD/MMC card or the internal
memory.
Wait until the flash strobe is
fully charged.
Set the SD card to be
writable.
Use the camera "Format"
function to format the card.
Replace the memory card
with a new one.