AIPTEK MPVR User Manual page 41

When using the camera:
Problem
I did not delete the
pictures and video
clips, but can not
find them in the
memory card.
Cannot use the flash
strobe.
The camera does
not respond to
any action during
operation.
The recorded
pictures appear too
blurred.
The recorded
pictures or video
clips appear too
dark.
Noises occur when
viewing images on
the LCD monitor or
on the computer.
Appendix:A
Cause
The lost recordings are
saved in the internal
memory.
If the battery icon
indicates low battery,
the flash strobe may
be disabled due to
insufficient voltage.
The camera encounters
software failure.
The focus is not
correctly set.
The environment of
shooting or recording
does not have adequate
light.
The flicker setting does
not match the standard
of the country you are
staying.
40
Solution
It happens when you insert
a memory card after taking
a few pictures or video clips.
You can access those files
after removing the memory
card.
Replace the battery.
Remove the battery pack
and replace it into the
compartment. Then power
on the camera.
Adjust the focus to an
appropriate position.
Use flash strobe when taking
pictures. Add extra light
sources when recording
video clips.
Adjust the flicker setting. For
more information, please
refer to the "Flicker Settings"
table on page 42.