Changing The Settings - Sennheiser Dante SL DI 4 XLR Instruction Manual

Establishing a connection to a SL DI 4 XLR
To establish a connection to a SL DI 4 XLR:
Select the desired SL DI 4 XLR from the drop-down list on the right of the navigation bar..
The drop-down list shows all SL DI 4 XLR devices that are in the same network as the PC on which
the SL DI CONTROL software is running.
After having selected the desired device, click on Connect.
The connection to the selected device is established and the following configuration window opens:

Changing the settings

The configuration window allows you to adjust the following settings for each analog XLR input
(IN 1, IN 2, IN 3, IN 4):
Gain
Select the level adjustment for the desired input from the drop-down list
-12 dB Attenuation of -12 dB. At the front of the SL DI 4 XLR, the PAD LED of the
selected input lights up.
0 dB No
LED lights up.
+15 dB
At the front of the SL DI 4 XLR, the
+30 dB At the front of the SL DI 4 XLR, the
+45 dB At the front of the SL DI 4 XLR, the
Phantom
Tick the check box to activate the phantom power for the desired input.
At the front of the SL DI 4 XLR, the
The SL DI 4 XLR Dante™ interface
+15
LED of the selected input lights up.
+30 LED of the selected input lights up.
+45 LED of the selected input lights up.
P48 LED of the selected input lights up.
SL DI 4 XLR 7/11