Download Print this page

Barrett 2050 Quick Reference Manual page 2

Advanced hf ssb transceiver
Hide thumbs Also See for 2050:

Advertisement

BARRETT 2050
Advanced HF SSB Transceiver
Direct dial
select a suitable channel
TELCALL +
make the telephone call via
using the
wish to dial
Press the
Your transceiver is now transmitting a special emergency call sequence that if
received by other transceivers will immediately alert them and if your transceiver
has a GPS receiver fitted will show them your position.
To stop the sequence press the
Note:- For security reasons when the transceiver is sending emergency calls there is
no indication from the transceiver either visual or audible.
Note:- your transceiver must be specifically programmed to use this function
To select the mute press the
now press the
There are three types of mute squelch available, audio (syllabic) mute which only
opens when voice transmission is detected, signal strength mute which opens when
a signal above a preset value (value set in Protected menu section) is present and
Selcall mute which opens when a selcall is received.
To select the scan table you wish to use press the
seconds and use the
press the
To view recently received calls press the
Press the
the Inbox or Outbox which contain old received calls
and recently sent calls respectively.
Please note:
This guide should be used in conjunction with the Barrett 2050 Operation and Installation manual.
BCM20100/2
+
press the
enter the four or six digit ID of the base station you are using to
CALL
or
Scroll keys +
press
or
select it from the Phone Book using the scroll keys
!
button for more than two seconds and less than ten seconds.
Mute
Mute
key successively to select the mute (squelch) type required.
0
or
ENTER
key.
ENTER
key
to view New calls. Or use the
Quick Reference Guide
key
CALL
select this station if it is in the address book
the
key, enter the telephone number you
CALL
key or turn off the transceiver
Clear
key once and the current mute will be displayed,
0
Scan
wxyz
keys to select the required scan table then
key for more than 2 seconds.
CALL
+
use the
Scroll keys
+
CALL
key for more than 2
9
or
keys to select
to select

Advertisement

loading