Secure The Mr46E-Hw; Security Screw; Kensington Lock - Cisco MERAKI MR46E-HW Hardware Installation Manual

4.3 Secure the MR46E-HW

Depending on your mounting environment, you may want to secure the MR46E-HW to its mount location.
Your MR46E-HW
can be secured in several ways. If the MR46E-HW has been installed using the mount plate, it can be
secured via security screw (Torx and phillips head security screws are included; choose one), and/or
Kensington lock. If the mount
plate was not used, the MR46E-HW can still be secured using a Kensington lock.

4.3.1 Security Screw

Install the security screw in the lower mount plate tab.

4.3.2 Kensington Lock

Attach a Kensington lock cable to the access point at the hard point on the side of the device. Attach the
other end of the cable to a secure location, such as a pipe or building fixture.
22