Secure The Mr34 - Cisco MERAKI MR34 Installation Manual

To release the MR34 from the mount cradle, first remove the security screw that secures the MR34 to the cradle's
bottom tab. While holding the MR34 with one hand, press the cradle's bottom tab upwards, releasing the MR34 from the
bottom of the cradle. Then remove the MR34 from the cradle's top tab.
Desk or Shelf Mount
The MR34 can be placed on a desk or shelf resting on the non-scratch rubber feet. The mount cradle is not necessary
for a desk or shelf installation.

Secure the MR34

Depending on your mounting environment, you may want to secure the MR34 to its mount location. Your MR34 can be
secured in several ways. If the MR34 has been installed using the mount cradle, it should be secured via security screw
(Torx security screws are included) and/or Kensington lock. If the mount cradle was not used, the MR34 can still be
secured using a Kensington lock.
13