Secure The Mr36-Hw; Security Screw; Kensington Lock - Cisco Meraki MR36-HW Hardware Installation Manual

4.3 Secure the MR36-HW

Depending on your mounting environment, you may want to secure the MR36-HW to its mount location.
Your MR36-HW
can be secured in several ways. If the MR36-HW has been installed using the mount plate, it can be
secured via security screw (Torx and Philips head security screws are included; choose one), and/or
Kensington lock. If the mount
plate was not used, the MR36-HW can still be secured using a Kensington lock.

4.3.1 Security Screw

Install the security screw in the lower mount plate tab.

4.3.2 Kensington Lock

Attach a Kensington lock cable to the access point at the hard point on the side of the
device. Attach the other end of the cable to a secure location, such as a pipe or building
fixture.
22