Insignia NS-HTSB22 User Manual page 16

Notes:
• Some devices, such as an iPhone, connect immediately after pairing so the
status indicator on your soundbar remains on. Other devices, such as
notebook computers, may ask you if you wish to connect. In this instance,
the status indicator continues to blink until a connection is established.
• When you turn on your soundbar, it automatically connects to the last
connected device if that device is in range. To connect to a different paired
device, turn off Bluetooth or unpair from the currently paired device and
manually connect to the other paired device.
• When a call is received while playing music through a phone, the music
stops automatically.
• When the call ends, depending on the setting of your phone, the current
track may resume playback.
Important: Make sure that the device you connect and select as your sound
source is outputting sound to your soundbar. See your device's user manual for
more information.
Disconnecting your devices
• Turn off the Bluetooth function on your device.
Reconnecting to a paired device
When your soundbar is not paired to a device, the LED indicator blinks.
Your soundbar loses the Bluetooth
connection if you...
Turn it off.
Move the Bluetooth device out of
range.
Turn off your Bluetooth device.
Turn off Bluetooth on your Bluetooth
device.
Connect your Bluetooth device to
another Bluetooth device.
Note: If a device does not automatically reconnect, you may need to reselect
NS-HTSB22 on your Bluetooth device.
16
To reconnect...
Turn on your soundbar. Your soundbar searches
for the last connected Bluetooth device and
reconnects.
Move your Bluetooth device within 33 ft. (10 m)
of your soundbar.
Turn on your Bluetooth device, then make sure
that Bluetooth is on.
Turn on Bluetooth on your Bluetooth device.
Disconnect your Bluetooth device from the
other Bluetooth device, then set your device to
pairing mode. Select NS-HTSB22 on your
Bluetooth device.
www.insigniaproducts.com