Eremote Control - Toyotomi ETK-S50 Operating Manual

2 To switch modes, press this button again during flashing. Set at your desirable
mode.
• The Room Mode will flash to light up after a period of time, and the Room
Mode is set.
• To select a different mode, start the procedure from 1 again.
• The operation does not start even if pressing the Room Mode button while
in shutdown.
E
REMOTE CONTROL
Use the remote control to operate the following functions:
Use this button to switch the device on and off.
Pressing this button will change the fan mode as follows:
Ions Ions
+ +
AUTO Silence
The appropriate fan speed light
Use this button to operate the timer function. To operate the timer, take the
following steps:
1 Switch the device on.
2 Press the
button.
3 Light 1 at
on the display will switch on, which means that the device will
switch off automatically after 1 hour. Press the
rating period of 2 or 4 hours. The appropriate light will switch on.
4 Press the
button again to switch the timer function off.
!
attention!
The Timer setting will be deleted when you switch the device off with
the button.
4
8
Ions Ions
+ +
Normal High
, , or will switch on.
button again to set an ope-
Ions
+
Fast