Noises - LG LSGL6337 Series Owner's Manual

us_main.book.book Page 69 Monday, February 1, 2021 4:41 PM
Problem
Range is not level. Poor installation.
• Place oven rack in center of oven. Place a level on the oven rack. Adjust leveling legs at
• Be sure floor is level and strong and stable enough to adequately support range.
• If floor is sagging or sloping, contact a carpenter to correct the situation.
Kitchen cabinet alignment may make range appear unlevel.
• Be sure cabinets are square and have sufficient room for range clearance.
Cannot move Cabinets not square or are built in too tightly.
appliance easily.
• Contact builder or installer to make appliance accessible.
Appliance must be
accessible for
Carpet interferes with range.
service.
• Provide sufficient space so range can be lifted over carpet.
Anti-tip device engaged.
• Uninstall the anti-tip device to move the range. Reengage the anti-tip device after pulling
Convection fan Convection fan stops during a convection bake cycle. It is done to allow for more even
stops. (During heating during the cycle.
Conv.Bake mode)
• This is not a failure of the range and should be considered normal operation.
Fan operation This is to ensure even baking results.
(During Bake Mode)
• It is normal for the fan to operate periodically throughout a normal bake cycle in the oven.

Noises

Problem
"Crackling" or This is the sound of the metal heating and cooling during both the cooking and Self
"popping" sound Clean functions.
• This is normal.
Fan noise A convection fan may automatically turn on and off.
• This is normal.
When lighting just Electric spark igniters from the burners cause the clicking noise. All the spark igniters
one burner, clicking on the cooktop will activate when igniting just one burner.
noise is heard from
• This is normal.
all the burners.
base of range until the oven rack is level.
the range out for cleaning, service, or any other reason.
TROUBLESHOOTING
Possible Cause & Solution
Possible Cause & Solution
69