Noises; Wi-Fi - LG LTGL6937D.BBDELGA Owner's Manual

70 TROUBLESHOOTING
Problem
Light can be seen
through the oven air
vents.
Range is not level.
Cannot move
appliance easily.
Appliance must be
accessible for
service.
Convection fan
stops. (During
Conv.Bake mode)
Fan operation
(During Bake Mode)

Noises

Problem
"Crackling" or
"popping" sound
Fan noise
When lighting just
one burner, clicking
noise is heard from
all the burners.

Wi-Fi

Problem
Trouble connecting
appliance and
smartphone to Wi-Fi
network
While the Broil function is running, it is normal to see a light between the oven air
vents.
• This is normal.
Poor installation.
• Place oven rack in center of oven. Place a level on the oven rack. Adjust leveling legs at
base of range until the oven rack is level.
• Be sure floor is level and strong and stable enough to adequately support range.
• If floor is sagging or sloping, contact a carpenter to correct the situation.
Kitchen cabinet alignment may make range appear unlevel.
• Be sure cabinets are square and have sufficient room for range clearance.
Cabinets not square or are built in too tightly.
• Contact builder or installer to make appliance accessible.
Carpet interferes with range.
• Provide sufficient space so range can be lifted over carpet.
Anti-tip device engaged.
• Uninstall the anti-tip device to move the range. Reengage the anti-tip device after pulling
the range out for cleaning, service, or any other reason.
Convection fan stops during a convection bake cycle. It is done to allow for more even
heating during the cycle.
• This is not a failure of the range and should be considered normal operation.
This is to ensure even baking results.
• It is normal for the fan to operate periodically throughout a normal bake cycle in the oven.
This is the sound of the metal heating and cooling during both the cooking and Self
Clean functions.
• This is normal.
A convection fan may automatically turn on and off.
• This is normal.
Electric spark igniters from the burners cause the clicking noise. All the spark igniters
on the cooktop will activate when igniting just one burner.
• This is normal.
The password for the Wi-Fi network was entered incorrectly.
• Delete your home Wi-Fi network and begin the connection process again.
Mobile data for your smartphone is turned on.
• Turn off the Mobile data on your smartphone before connecting the appliance.
Possible Cause & Solution
Possible Cause & Solution
Possible Cause & Solution