Supported Features For The Epson Projector Professional Tool - Epson EB-L735U User Manual

Supported Features for the Epson Projector Professional Tool

Your projector supports the following features and options for the Epson
Projector Professional Tool software.
• The Epson Projector Professional Tool software does not support
multiple projector connected in a chain using HDMI Out Setting in
the projector's Multi-Projection menu and the HDMI Out ports.
a
• If you change the Screen Type and Screen Position settings, the
Geometry Correction settings are reset.
• If you want to turn on the projector through the HDBaseT
transmitter, set the A/V Output setting to Always On in the
projector's Signal I/O menu.
Features/Options
Camera Assist
features
Layout/Monitorin Input Voltage
g tab
Setting tab Lens Control tab
Initial Setting >
Basic 3 tab
EB‑L735U/EB‑L730
U/EB‑L720U/EB‑L6
35SU/EB‑L630SU/E
B‑L630U/EB‑L530U
/EB‑L520U
-
-
-
Startup
(Shutter)/Standby -
(Shutter)
Fade-in
(seconds)/Fade-out
-
(seconds)
Shutter Timer
You can set this as
the projector's A/V
Mute Timer
setting.
Standby
-
Confirmation
Features/Options
Reset All Config
Reset Screen
Matching
Geometry Curved Surface
Correction tab
Corner Wall
Marker display
when dragging and
dropping a point
Adjustments
outside the
projection area
An absolute
coordinate value
and a relative
coordinate value
Geometry
General menu
Correction File
Projector File
258
EB‑L735U/EB‑L730
U/EB‑L720U/EB‑L6
35SU/EB‑L630SU/E
B‑L630U/EB‑L530U
/EB‑L520U
The following
settings are also
reset:
• Color
Uniformity
• Color Matching
Only the following
settings are reset:
• Color
Uniformity
• Color Matching
-
-
-
-
✓
-
-