Scandomestic IKF 180-1 User Manual page 54

2. Touch timer control , the "10" will show in the
timer display. and the "0" fiashes.
3. Set the time by touching the slider control. (e.g. 5)
4. Touch timer control again, the "1" will flash.
5. set the time by touching the slider control (e.g.9), now the timer you set is 95
minutes.
5. When the time is set, it will begin to count down immediately. The display will
show the remaining time
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
20