Table of Contents
Advertisement
COMMISSIONING
HYDRAULIC CIRCUIT FOR FOLDING SIDE AND OUTSIDE FRAMES
- ONE RED RING
The side frames are folded into the transport position when this circuit branch is
pressurized.
HYDRAULIC CIRCUIT FOR FOLDING SIDE AND OUTSIDE FRAMES
- TWO RED RINGS
The side frames are unfolded into the working position when this circuit branch is
pressurized.
HYDRAULIC CIRCUIT FOR CONTROLLING THE TRANSPORT AXLE
- ONE YELLOW RING
The transport axle is lifted into the transport position, i.e. the working parts are in the
highest position against the axle, when this circuit branch is pressurized.
HYDRAULIC CIRCUIT FOR CONTROLLING THE TRANSPORT AXLE
- two yellow rings
The transport axle is put into position where the working parts are in the set working
depth against the wheels of the machine when this circuit branch is pressurized.
HYDRAULIC CIRCUIT FOR CONTROLLING THE WORKING DEPTH OF
PLOUGHSHARES
- one green ring
Ploughshares are taken out of the processed profile when this circuit branch is
pressurized.
HYDRAULIC CIRCUIT FOR CONTROLLING THE WORKING DEPTH OF
PLOUGHSHARES
- two green rings
Ploughshares are recessed into the processed profile when this circuit branch is
pressurized.
HYDRAULIC CIRCUIT FOR CONTROLLING THE POSITION OF THE FLEXI-BOARD
AND THE SUPPORTING LEG OF THE DRAWBAR
- one blue ring
The levelling bar is lifted from the ground and the supporting leg of the drawbar is
lifted when this circuit branch is pressurized .
HYDRAULIC CIRCUIT FOR CONTROLLING THE POSITION OF THE FLEXI-BOARD
AND THE SUPPORTING LEG OF THE DRAWBAR
- two blue rings
The levelling bar is recessed to the ground and the supporting leg of the drawbar is laid
down when this circuit branch is pressurized.
HYDRAULIC CIRCUIT FOR CONTROLLING ROLLERS
- one white ring
Rollers are lifted up when this circuit branch is pressurized.
HYDRAULIC CIRCUIT FOR CONTROLLING ROLLERS
- two white rings
Rollers are pushed to the ground when this circuit branch is pressurized.
24 | 59
Advertisement
Table of Contents
