DeWalt DW0165 User Manual page 19

Select as the measurement type.
4.
• Press to display the Main Menu
(Figure ).
E 2
• Press to select
• Press to display the Measurement
Type Menu (Figure
• Press the arrow buttons to select
• Press .
Position the tool opposite the approximate
5.
center of the vertical height to be
measured (Figure
Point the laser toward the lowest point of
6.
the building or object whose height you
need to measure (Figure
Press to measure the distance.
7.
From the same point, aim the laser at
8.
the highest point of the building or object
(Figure ).
Q 3
Press to measure the distance.
9.
On the bottom line of the screen, view the
10.
height of the building or object (Figure
).
4
Measuring Partial Height of a Wall
If you need to determine the height of a
section of a wall or object (e.g., the distance
from the ceiling to the top of TV or window on
the wall) (Figure ).
R
Point the tool's laser (Figure
1.
a wall or object, and not toward anyone's
eyes.
Press (Figure
2.
on and display the red laser dot.
Make sure the tool position setting
3.
(Figure ) is correct for taking the
C 4
measurement.
.
).
E 3
.
).
Q 1
).
Q 2
Q
) toward
A 1
) to turn the tool
A 3
Select as the measurement type.
4.
• Press to display the Main Menu
(Figure ).
E 2
• Press to select
• Press to display the Measurement
Type Menu (Figure
• Press the arrow buttons to select
• Press .
Point the laser at the highest point of the
5.
wall or object (Figure
Press to measure the distance to
6.
the top of the tall object.
From the same point, aim the laser at
7.
the top of the obstruction on the wall or
object (Figure
R 2
Press to measure the distance from
8.
the top of the wall to the obstruction (TV,
window, etc.).
From the same point, aim the laser on a
9.
horizontal line straight ahead toward the
bottom of the wall (Figure
Press to measure the distance.
10.
On the bottom line of the screen, view
11.
the distance between the top of the wall
and the top of the obstruction on the wall
(Figure ).
R 4
Measuring Height of Obstructed Object
-
Follow these steps to determine the height
of a tall building or object that is blocked by
other buildings or objects (Figure
Point the tool's laser (Figure
1.
a wall or object, and not toward anyone's
eyes.
.
).
E 3
.
).
R 1
).
).
R 3
).
S
) toward
A 1
E
19