Table of Contents
Advertisement
1. GENERAL SAFETY INSTRUCTIONS
1.1. INTRODUCTION
Dear client:
We thank you for your confidence in JNF for acquiring this innovative automatic overhead door closer. JNF offers
products designed and developed following high demanding production standards, to ensure we deliver a product
with the best quality, as well as a superb user friendly experience and easy installation. This manual includes
important and necessary information for the correct and safe installation, use and maintenance of this sliding door
system. Please, read these instructions in full before starting the installation.
1.2. OVERVIEW
This manual is applicable to the installation, use and maintenance of the IN.21.900, which is designed for being
used indoors. The section in this manual related to installation and commissioning, is limited only and exclusively
for use by qualified skilled technicians
1.3. GENERAL NORMS
JNF declines all civil or criminal liabilities for injuries caused to persons, animals and/or objects as a result of:
A. Not proceeding following the indications contained in the installation, user and maintenance
manuals.
B. A non-authorized manipulation of the product.
C. The replacement of parts and/or pieces of the operator, as well as the use of accessories which are
not original, or which have not been homologated by the manufacturer.
D. Removing, deleting or altering the stickers, labels and/or other indications placed in origin, on the
automatic door operator or its accessories.
E. Standing within the course of the door leaf of the automatic door, or performing tasks near possible
parts in motion.
1.4. WARRANTY
The manufacturer's warranty for the IN.21.900 will be VOID if:
A. The installation, use and/or maintenance of the product did not follow the norms, instructions and
indications described in this manual.
B. Using non-original components, accessories, parts, pieces or electronics systems, being these new or
for replacement purpose, when these parts haven't been supplied or homologated by the supplier.
1.5. DISPOSAL AND RECYCLING
When disposing the packaging materials, it is recommended to check the specific regulation in force at the
installation site, before proceeding to dispose it. Packaging materials are similar to other urban solid waste
materials, and therefore they can be easily disposed after doing a selective classification and recycling.
When the product needs to be disposed, as this is composed of different materials, we recommend:
A. Materials such as aluminium, plastic, steel, electrical cables (etc) are solid waste materials, which
need to be carefully classified for a proper recycling in authorized recycling centres.
B. Other components such as the plates of electronic circuits, capacitors, batteries, magnets (etc)
may contain contaminating materials, and as such, they must be carefully removed and delivered to
companies specialized in their evacuation, classification and disposal.
DO NOT THROW AWAY THE PACKAGING OR PRODUCT MATERIALS ANYWHERE. RECYCLE!!
INSTALLATION MANUAL / MI0315.1
EN
www.jnf.pt
4/72
Advertisement
Table of Contents
