Related Manuals for Walker Edison TW60H
Summary of Contents for Walker Edison TW60H
-
Page 2: General Assembly Guidelines
General Assembly Guidelines Insure that all parts and hardware are available before beginning assembly. Follow each step carefully to insure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. The main types of hardware used to assemble this product are wood dowels, screws, bolts and washers. -
Page 3: Parts List
Parts List... - Page 5 Insert dowels (A) into slats (7,14,15,17) and crossbar (18) as shown above. Carefully fit table top pieces (1,2,3) firmly together.
- Page 6 Insert dowels (A) into table top pieces (1,2,3). Attach slats (6) to slats (7) using dowels as guides.
- Page 7 Attach slats (6,7) to table top pieces (1,2,3) using screws (C). Attach slats (5) to table top pieces (1,2,3) using screws (C).
- Page 8 Attach corner blocks (13) to slats (5,6) using screws (C). Attach corner blocks (12) to slats (8,9,10) using screws (C). Repeat this step for second set of slats (8,9,10).
- Page 9 Attach slats (8,9,10) to table top pieces (1,2,3) using screws (C). Slide slats (11) into place along table top assembly.
- Page 10 Insert dowels (A) into slats (11). Attach table locks (J) to slats (5) using screws (K). Attach crossbars (19) to crossbar (18) using bolts (D). Tighten bolts (D) with wrench (M).
- Page 11 Attach crossbars (19) to legs (20,21) using screws (B). Attach end caps (22) to crossbars (19) using dowels as guides. Align legs (20,21) with slats (8,9,10). Attach legs (20,21) to corner blocks (12) using bolts (E), spring washers (F) and washers (G). Tighten all bolts (E) with wrench (N).
- Page 12 Attach slats (17) to leaf (4) using screws (C). Repeat this step for second leaf (4). Attach slats (14,15,16) to leaf (4) using screws (C). Repeat this step for second leaf (4).
- Page 13 Attach corner blocks (13) to slats (14,16,17) using screws (C). Attach table locks (H) and brackets (L) to slat (15) using screws (K). Repeat this step for second leaf (4). Align leaves (4) with main table assembly.
- Page 14 Pull slats (11) through leaves (4). Lock leaves (4) to main table assembly using table lock pieces (H,J).