Table of Contents
Advertisement
Instruction Manual
max output signal
response time
(2)
input power
fuse required
supply voltage ripple
connector
CE compliance
environmental
1) Non-linearity, hysteresis, repeatability at 25 Deg
WARNING!
(2)
The gauge may only be connected to power supplies, instruments, or control devices that conform to the
requirements of a grounded protective extra-low voltage (SELV) and limited power source (LPS), Class 2. The connection to the gauge has
to be fused.
Dimensions
1.3
InstruTech
+ 10.24 Vdc
100 msec (from 10% to 90% F.S.)
13 to 30 Vdc, 0.3 W protected against power reversal
1 AT (slow), automatic reset (Polyfuse)
≤50 mVpp
9-pin D-sub male
EMC (EN61000-6-2, EN61000-6-3, EN61010-1)
RoHS compliant
o
C ambient temperature without temperature effects after 2 hours operation.
in. (mm)
Fitting
1/2 in. Tube
NW16KF
NW25KF
1 1/3 in. Mini-CF
1/4 in. Cajon 4VCR
1/2 in. Cajon 8VCR
CDM900 Micro Bee
dimension A
0.59 in. (15.0 mm)
1.20 in. (30.7 mm)
1.39 in. (35.5 mm)
1.28 in. (31.1 mm)
2.43 in. (61.8 mm)
1.77 in. (45.0 mm)
Page 3
Advertisement
Table of Contents
